Avancon logo

avancon OTU 2 inside ...

NEW

strong bevel gear system

It is produced 

of High-Tech Polymer Materials, which are wear-resistant and highly efficient.

The two motors can operate up to 12 OTUs in line.

All movements of the patented avancon OTU are built with very sophisticated construction to incorporate all elements into this little block.

With this incredibly constructed modular brick you can put together tables in conveyor systems of all applications and movements, which automatically convey into any direction.

The injection molding parts are precisely made of High-Tech reinforced Polymer Materials, which are highly impact resistant and abrasive. All spindles run on Precision Ball-Bearings 2RS.

See also the video about OTU:

As a universal and variable element, it is able to transfer all sizes of goods with very high speed.

This avancon OTU brick can be just put together through the dovetails and being modular connected with the intermediate timing belts, one to another on 3 sites if required. So you get any size of transfer tables for switches and diverters, crossings and sorters and many more.

The avancon OTU drives the rollers directly through a bevel gear system inside.

All avancon OTUs of a transfer table are connected with T5-belts (timing belt) and the direction is changed via a tooth rod. The latter is moved by one or two new high performance Brushless DC-motors.

The avancon OTU-2-bricks measure 75.4 x 75.4 x 133 mm.

NEW

incorporated drive system.

Here you can see the excellent and simple idea that the avancon OTU-2 profile is made of aluminum and the OTU-2 is pushed onto it. Below are the ribs that hold the ASi cables (yellow for the ASi control, black for the motor), all controls.


On the right side you can see the installed avancon OTU-2 Line, which you can easily put into the conveyor frame with the 2  screws on each side, similar to installing a roller.

OTU 2 LINE

This cut-away shows the OTU-2 line together on the new OTU-2 profiles. This can be mounted between any conveyor construction -just that simple.

The height of the whole construction including the new incorporated Motors and Controls is only 

163 mm!

So, you can get:

Corners, keeping the direction,

or moving sideways


Crossings,

 moving sideways into both

 directions as full OTU-table or as  OTU-lines

Switches,

 right or left or into both sides

The table builds already a curved movement - for easier construction and space saving

Crossways-Transfer

 the direction can change from straight to crossways on both sides

...and many more...

..as

U-turns,

Rotation of goods,

moving Sideways before bar-code-reader,

Distribution lines....

...and Sorters:

sortation line in an e-commerce company, avancon sorter

This avancon Sorter is as fast as the stacker cranes, sufficient in most applications with electronic speed-controlled chutes:

avancon sorter for SAMSUNG smartphones

Another way to build an avancon Sorter. This is very compact, but sorts small items of only 130 mm length, but also larger cartons as well. This sorter is installed with the System-Integrator ASETEC at SAMSUNG, South Korea for Smartphones and other items.

avancon OTU FAST COMPACT SORTER for the Post and Online-Shop for small packages   (see video)

See the whole story and the video 

arrow

AVANCON SA

Via Campagna 27

CH-6595 Riazzino /Switzerland

phone: +41 (0)91 222 10 10

e-mail: relations(at)avancon.com

instagram
youtube
linkedin

© 2021 All Rights Reserved | AVANCON SA

vimeo

This site uses cookies, including third parties, necessary for its operation. If you click "ACCEPT" you consent to the use of third party cookies affected by the GDPR legislation. If you want to keep them deactivated click “NOT ACCEPTED”. If you disable them some functions of the site will be blocked. MORE INFORMATION

NOT ACCEPTED

ACCEPTED